Turbosound

iP3000-PC Deluxe Water Resistant Protective Cover for iP3000 Power Stand Product Features Deluxe water resistant protective cover for power stand subwoofer Rugged black multi-layer nylon outer material prevents ingress of dirt and dust Thick interior foam padding provides superior protection in transit Openings in cover allow access to built-in cabinet handles Ideal for Turbosound iP3000 power stand Designed and engineered in the U.K.   iNSPIRE iP3000-PC You depend on your PA system to work perfectly night after night – so protect it with a custom-fit TURBOSOUND deluxe water-resistant cover. Made of super-tough, multilayer black nylon, the iP3000-PC is a "must-have" accessory for your iP3000 Power Stand.   Protection Against the Elements The rugged iP3000-PC helps keep your iP3000 free from dirt and moisture during transit to and from the gig, and protects it from dust in-between performances. Made to Travel Because the iP3000-PC is designed to fit perfectly, custom-sized openings are provided for convenient carry handle access – and the thick layer of interior padding provides exceptional protection during transit.   Value The super-tough, multi-layer black nylon iP3000-PC fits your iP3000 Power Stand like a glove, and protects your investment from dirt, dust and rain – and is an amazingly-affordable way to keep your gear looking great for years.  

Read more less

TPOLE120-20 120 cm Lightweight Steel Pole with M20 Screw Attachment Product Features  120 cm lightweight steel pole
 M20 threaded screw attachment for stability
 Mounts mid-high loudspeaker above subwoofer
 Designed and engineered in the U.K.
   ACCESSORIES TPOLE120-20 The TPOLE120-20 provides the sturdiest and most reliable means of mounting TURBOSOUND full range loudspeakers with a standard 35 mm pole mount above TSP and TMS series subwoofers. Made from a lightweight but rugged steel pole, the 120 cm (47") TPOLE120-20 features an M20 threaded attachment that screws securely into the subwoofer for greater stability.  

Read more less

TPOLE90-20   90 cm Lightweight Steel Pole with M20 Screw Attachment Product Features 90 cm lightweight steel pole
 M20 threaded screw attachment for stability
 Mounts mid-high loudspeaker above subwoofer

 Designed and engineered in the U.K.
   ACCESSORIES TPOLE90-20 The TPOLE90-20 provides the sturdiest and most reliable means of mounting TURBOSOUND full range loudspeakers with a standard 35 mm pole mount above TSP and TMS series subwoofers. Made from a lightweight but rugged steel pole, the 90 cm (35") TPOLE90-20 features an M20 threaded attachment that screws securely into the subwoofer for greater stability.  

Read more less

TPOLE60-20   60 cm Lightweight Steel Pole with M20 Screw Attachment Product Features  60 cm lightweight steel pole
 M20 threaded screw attachment for stability
 Mounts mid-high loudspeaker above subwoofer
 Designed and engineered in the U.K.
   ACCESSORIES TPOLE60-20 The TPOLE60-20 provides the sturdiest and most reliable means of mounting TURBOSOUND full range loudspeakers with a standard 35 mm pole mount above TSP and TMS series subwoofers. Made from a lightweight but rugged steel pole, the 60 cm (24") TPOLE60-20 features an M20 threaded attachment that screws securely into the subwoofer for greater stability.  

Read more less

iP300 600 Watt Powered Column Loudspeaker with 2 x 6.5" Woofers, 4 Neodymium Drivers, Klark Teknik Spatial Sound Technology, Reverb, Digital Mixer, Remote Control via iPhone/iPad and Bluetooth Audio Streaming. Product Features  Column loudspeaker for portable PA applications and high-quality music playback
 Klark Teknik's revolutionary SST (Spatial Sound Technology) for creating 3D acoustic environments
 Extremely wide sound dispersion provides consistent sound to the audience and performers
 600 Watt power, multi-channel Klark Teknik Class-D technology
 3 channel digital mixer with gain setting recall
 High-quality Klark Teknik digital reverb for amazing vocal enhancement
 Comprehensive remote control via Apple iPhone/iPad*
 High-quality Bluetooth* stereo audio streaming
 DSP presets for application type and speaker positioning
 Intuitive single rotary control user interface with LCD display for ease of navigation
 Dual 6.5" high excursion low-frequency driver for low distortion sub-bass response
 4 x 2? neodymium drivers with edge wound aluminum voice coils for extended high-frequency reproduction
 Multiple height configurations for floor or elevated use
 High impact and lightweight enclosure
 Integrated protective perforated steel mesh grilles
 Integral ergonomic carrying handle for ease of portability
 Designed and engineered in the U.K.
   iNSPIRE iP300 Although the INSPIRE iP300 is referred to as a “column” loudspeaker, the INSPIRE iP300 delivers powerful, high-quality sound and optimised dispersion inspired by award-winning line array products – in a surprisingly lightweight and easy-to-use, all-in-one form factor. Thanks to an on-board 3-channel digital mixer and multichannel 600-Watt Class-D amplifier driving 2 x 6.5" high excursion low-frequency drivers and 4 x 2" neodymium drivers, the iP300 is ideally-suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs, and much more.   Tiny PA - 600 Watts of Perfect Sound Compact and designed for maximum portability, iP300 setup is fast and easy; just attach the column section(s) to the base and connect your mic or mixer feed and power. The Turbosound revolutionary Class-D amplifier technology provides 600 Watts of incredible sonic performance in an easy-to-use, ultra-portable, and lightweight package. This amazing technology makes it possible to design and build extremely powerful products that are significantly lighter in weight than their traditional counterparts while using less energy and protecting the environment.   Outstanding Sound Dispersion Much like the huge line array systems you’ve experienced at concerts and outdoor festivals (we make those too), the 2" neodymium midrange / extended high-frequency drivers in the iP300 columns are strategically placed to provide an extremely wide dispersion pattern. Such wide coverage eliminates the need for monitor wedges for the performers and creates a more even, sonically balanced soundscape that covers the entire room.   KLARK TEKNIK- Inspired Technology TURBOSOUND is proud to incorporate custom-engineered KLARK TEKNIK Class-D amplifier and DSP technologies into their products.   DSP - the Secret to Superb Sound From the instant your signal enters the iP300, the built-in DSP takes over ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the 24-bit processor analyses the incoming signal and intelligently applies specific filters to actually improve the sound quality. It’s like having an audio engineer monitoring the input and output signals, dialing in the perfect EQ, and constantly making subtle adjustments to the crossover, compressor/limiter, three discrete amplifier channels, and more – all of which adds up to significantly better sound.   Custom-Engineered Drivers Turbosound speakers are designed specifically for each application – it’s what sets us apart from the competition. When you buy a TURBOSOUND speaker system, you can rest assured that the speakers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results.   Built-in Digital Mixer - Comprehensive Remote Control Turbosound took Bluetooth a step further, giving you total control of the iP300 directly from your iPhone or iPad. This amazing feature lets you adjust all settings from either the listening area or the stage, for the perfect sound every time. The dedicated apps are available free of charge at turbosound.com, or from the Apple App Store.   Bluetooth Ready An industry first, the iP300 puts all your music at your fingertips via stereo Bluetooth. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped iOS device, such as your iPad, iPod touch, iPhone – or even your laptop computer.  

Read more less

iQ8   2500 Watt 2 Way 8" Powered Loudspeaker with Klark Teknik DSP Technology, Speaker Modelling and ULTRANET Networking Product Features  2 way full range loudspeaker for portable PA and installation applications
 2,500 Watt power featuring Klark Teknik Class-D technology
 Klark Teknik Digital Signal Processing for total system control
 Speaker modelling includes accurate models of industry standard speakers
 SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
 ULTRANET digital audio networking connects to mixers and other sources
 8" low frequency driver with low mass voice coil for improved transient response
 High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
 Fully featured user interface with LCD display for ease of navigation
 PC remote control software downloadable at turbosound.com
 Lightweight fibre glass reinforced composite enclosure
 Rugged powder coated perforated steel mesh grille
 Dual angle pole mount for accurate audience coverage
 Multiple internal rigging points for installation applications
 Mains input and link output on Neutrik powerCON* connectors
 10-Year Warranty Program*
 Designed and engineered in the U.K.
   iQ8 The 2,500-Watt iQ8 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 8" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper clad aluminium voice coil for extended high frequency reproduction. Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ8 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ8’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers. KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ8’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ8 features a mic/line switch and level control with signal present LED on each channel. The iQ8 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ8 via PC computer, as well as DSP and speaker modelling firmware updates. The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ8 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.

Read more less

iQ10 2500 Watt 2 Way 10" Powered Loudspeaker with Klark Teknik DSP Technology, Speaker Modelling and ULTRANET Networking Product Features 2 way full range loudspeaker for portable PA and installation applications
 2,500 Watt power featuring Klark Teknik Class-D technology
 Klark Teknik Digital Signal Processing for total system control
 Speaker modelling includes accurate models of industry standard speakers
 SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
 ULTRANET digital audio networking connects to mixers and other sources
 10" low frequency driver with low mass voice coil for improved transient response
 High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
 Fully featured user interface with LCD display for ease of navigation
 PC remote control software downloadable at turbosound.com
 Lightweight fibre glass reinforced composite enclosure
 Rugged powder coated perforated steel mesh grille
 Dual angle pole mount for accurate audience coverage
 Multiple internal rigging points for installation applications
 Mains input and link output on Neutrik powerCON* connectors
 10-Year Warranty Program*
 Designed and engineered in the U.K.
   iQ10 The 2,500-Watt iQ10 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 10" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction. Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ10 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ10’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers. KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ10’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors. On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ10 features a mic/line switch and level control with signal present LED on each channel. The iQ10 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ10 via PC computer, as well as DSP and speaker modelling firmware updates. The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ10 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.

Read more less

iX12 1000 Watt 2 Way 12" Powered Loudspeaker with Klark Teknik DSP Technology, Remote Control via iPhone/iPad, and Bluetooth Audio Streaming Product Features: 2-way full range, powered loudspeaker for portable PA applications
 1000 Watt power featuring Klark Teknik Class-D technology
 Klark Teknik Digital Signal Processing for total system control
 Comprehensive remote control via Apple* iPhone*/iPad*
 High-quality Bluetooth* stereo audio streaming
 Remote control 3 channel digital mixer with gain setting recall
 DSP presets for application type and speaker positioning
 12" low-frequency driver with low mass voice coil for improved transient response
 Titanium dome 1" compression driver for extended high-frequency reproduction
 Intuitive single rotary control user interface with LCD display for ease of navigation
 Durable lightweight molded enclosure
 Rugged powder-coated perforated steel mesh grille
 Dual angle pole mounts for accurate audience coverage

   iX12 The 1000-Watt iX12 is a powered two-way 12" loudspeaker with Bluetooth* audio streaming ideally suited for a wide range of portable and fixed music and speech sound reinforcement applications. A state-of-the-art Klark Teknik DSP controls the built-in 3-channel digital mixer via a single-knob user interface, as well as providing comprehensive wireless remote control via a dedicated app for iPhone/iPad. The iX12’s powerful 12" low-frequency driver and 1" titanium dome compression driver ensure the highest-quality low-end, extended high-frequency reproduction and articulate midrange reproduction.     Class-D – 1000 Watts of Perfect Sound The Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely powerful products that are significantly lighter in weight than their traditional counterparts while using less energy and protecting the environment.   KLARK TEKNIK DSP – the Secret to Superb Sound Turbosound is proud to incorporate custom-engineered Klark Teknik DSP into their products. From the instant your signal enters the iX12, the built-in DSP (Digital Signal Processor) takes over, ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the iX12’s 24-bit DSP analyses the incoming signal and intelligently applies specific filters to actually improve the sound quality. It is very much like having an audio engineer monitoring the input and output signals of each iX12, dialing in the perfect EQ, and constantly making subtle adjustments to the crossover, compressor/limiter, and more – which all adds up to significantly better sound.   Bluetooth Ready Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped iOS device, such as your iPad, iPhone – or even your laptop computer.   Comprehensive Remote Control We take Bluetooth a step further, giving you total control of the iX12 directly from your iPhone or iPad. This amazing feature lets you adjust all settings from either the listening area or the stage, for the perfect sound every time.   Custom-Engineered Drivers When you buy an iX12 loudspeaker, you can rest assured the genuine Turbosound 12" LF driver with low mass voice coil, and 1" exit titanium dome compression driver has been engineered to perform flawlessly in conjunction with every other element for truly professional results.   Intuitive User Interface On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display and a single rotary encoder for intuitive access to level, EQ, and frequency response presets for pole or stand-mounted front of house, or floor monitor scenarios. In addition to the two combination balanced XLR/jack inputs, an XLR output is provided for daisy-chaining more active loudspeakers, or for use with an active subwoofer.

Read more less

iP3000 2,000 Watt Powered Column Loudspeaker with a 2 x 12" Subwoofer, 18 Neodymium Drivers, Klark Teknik Spatial Sound Technology, Digital Mixer, Reverb, Remote Control via Smart Phone and Bluetooth Audio Streaming Product Features Modular column loudspeaker for portable PA applications and high-quality music playback
 Klark Teknik's revolutionary SST (Spatial Sound Technology) for creating 3D acoustic environments
 Extremely wide sound dispersion provides consistent sound to the audience and performers
 2,000 Watt power, multi-channel Klark Teknik Class-D technology
 3 channel digital mixer with gain setting recall
 Studio-grade stereo reverb adds a finishing touch to your sound
 Comprehensive remote control via Apple iPhone/iPad*
 High-quality Bluetooth* stereo audio streaming
 DSP presets for application type and speaker positioning
 Intuitive single rotary control user interface with LCD display for ease of navigation
 Dual 12" high excursion low-frequency driver for low distortion sub-bass response
 16 x 3.5" neodymium drivers for clean midrange and high-frequency reproduction
 Dual horn-loaded super-tweeters extend high-frequency range and throw
 Precision-lock, aluminium array system eliminates speaker stands and cables
 Roadworthy plywood enclosure with hard wearing semi matt black paint finish
 Rugged powder-coated perforated steel mesh grille
 Integral ergonomic carrying handles for ease of portability
 Designed and engineered in the U.K.
   iNSPIRE iP3000 Thanks to Turbosound's on-board 3-channel digital mixer with reverb and a multichannel 2,000-Watt Class-D amplifier driving a custom-engineered dual 12" subwoofer, 16 x 3.5" neodymium drivers, and dual horn-loaded super tweeters, the iP3000 is ideally-suited for medium to large-sized performance venues, houses of worship, boardroom presentations, nightclubs, and much more.   2,000 Watts of Perfect Sound Designed for maximum portability, iP3000’s two columns fit neatly into the shoulder bag (available separately), and setup is fast and easy; just attach the column(s) to the base and connect your mic, or mixer feed, and power. Three channels of our revolutionary Class-D amplifier technology provides 2,000 Watts of incredible sonic performance in an easy-to-use and ultra-portable package.   Outstanding Sound Dispersion Much like the huge line array systems you’ve experienced at concerts and outdoor festivals (we make those too), the 3.5" neodymium midrange / extended high-frequency drivers in the iP3000 columns are strategically placed to provide up to a 120° horizontal dispersion pattern. Such wide coverage eliminates the need for monitor wedges for the performers and creates a more even, sonically balanced soundscape that covers the entire room.   KLARK TEKNIK; Inspired Technology Turbosound is proud to incorporate custom-engineered Klark Teknik Class-D amplifier and DSP technologies into their products. DSP – the Secret to Superb Sound From the instant your signal enters the iP3000, the built-in DSP takes over ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the 24-bit processor analyses the incoming signal and intelligently applies specific filters to actually improve the sound quality.   Custom-Engineered Drivers When you buy a Turbosound speaker system, you can rest assured that the speakers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results.   Built-in Digital Mixer; Comprehensive Remote Control Turbosound takes Bluetooth a step further, giving you total control of the iP3000 directly from your iPhone or iPad. This amazing feature lets you adjust all settings from either the listening area or the stage, for the perfect sound every time. The dedicated apps are available free of charge at turbosound.com, or from the Apple App Store.   Bluetooth Ready With a simple wave of your hand, you can stream music from any Bluetooth-equipped iOS device, such as your iPad, iPod touch, iPhone – or even your laptop computer.  

Read more less

M15B 2200 Watt 15" Powered Subwoofer with Klark Teknik Technology for Portable PA and Installation Applications Product Features Band pass powered subwoofer for portable PA and installation applications 2,200 Watt power featuring Klark Teknik Class-D technology High excursion 15" low frequency driver with 4" voice coil and double suspension Bass boost and polarity switch for accurate low frequency system integration Birch plywood enclosure with hard wearing semi matt black paint finish Rugged powder coated perforated steel mesh grille 36 mm pole mount to support satellite speaker Plated steel castors with rubber tyres 10-Year Warranty Program* Designed and engineered in the U.K.   MILAN M15B The 2,200-Watt MILAN M15B is a powered portable band pass 15" subwoofer that is designed for maximum bass extension for both portable and permanent install applications. M15B’s discrete inputs are equipped with balanced, combination ¼ " jack/XLR connectors and a shared Level control, making them ideal for a wide range of music sources, from mixing consoles, low impedance microphones, guitars and keyboards.   Bandpass Enclosure Design Bandpass enclosures are extremely efficient, creating maximum bass output within a specific frequency range by increasing the acoustic load presented to the driver. The low distortion bandpass design utilised in the M15B reinforces the bass musical instrument frequencies, and steep cut-off slopes ensure an effective acoustic transition for use with MILAN Series full-range loudspeakers. A typical application could consist of an M15B providing the low-frequency bass extension for one, or two MILAN Series top cabinets.   Class-D - Massive Power, Perfect Sound Thanks to our revolutionary Class-D amplifier technology, we are able to provide 2,200 Watts of output power with incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment. The lightweight Switch Mode Power Supply, coupled with the industry-leading Klark Teknik Digital Signal Processing (DSP) module, provides dynamic equalisation and sophisticated limiting functions, ensuring optimal performance and long-term reliability. Custom-Engineered Drivers Powerful, high-efficiency Class-D amplifiers and Switch Mode Power Supply technology coupled with state-of-the-art DSP functionality sounds very impressive – but what about the part of the system you actually hear? We are known internationally for making some of the best-sounding speaker systems in the world, so we take our drivers (woofers and tweeters) very seriously. Our LF and HF drivers are designed specifically for each application – it is what sets us apart from the competition. When you buy a Turbosound loudspeaker, you can rest assured the high-excursion 15" LF driver inside has been engineered to perform flawlessly in conjunction with every other element for truly professional results. The MILAN M15B outputs massive quantities of tight and articulate bass – and works seamlessly with all MILAN Series loudspeakers.   Integrated Control Center The onboard control panel features a subwoofer Level control, a polarity switch for proper phasing with your loudspeakers, and a switchable Boost filter (set at 100 Hz), which ensures correct integration with your system. An additional filter allows the selection of Speech (for enhanced voice intelligibility), or Music for the broader frequency range required for the high-fidelity reproduction of musical content. Convenient XLR Thru connectors send both input signals to your powered full-range loudspeakers, or to additional powered subwoofers.   Built for Durability and Versatility The M15B’s enclosure consists of solid birch plywood with a hard wearing semi matt black paint finish, and is ribbed internally to eliminate resonances and to minimize vibration. Plated steel castors with rubber tyres are provided for easy transport, and the standard pole-mount socket allows powered loudspeakers to be mounted, either vertically or raised higher and angled down to optimise audience coverage. Mains power is connected via a non-locking IEC socket with integrated fuseholder. The illuminated front badge can be operated in one of three modes: permanently on; permanently off; or to indicate the action of limiting.  

Read more less

M12 1100 Watt 2 Way 12" Full Range Powered Loudspeaker with Klark Teknik DSP Technology for Portable PA and Installation Applications Product Features 2-way full-range powered loudspeaker for portable PA and installation applications
 1,100 Watt power featuring Klark Teknik Class-D technology
 Klark Teknik Digital Signal Processing for total system control
 High excursion 12" low-frequency driver with low mass voice coil for improved transient response
 1" high-temperature dome compression driver with extended high-frequency reproduction
 Converging elliptical waveguide provides wide dispersion and excellent pattern control
 Speech/music switch featuring optimised equalisation for voice or music applications
 Switchable 100 Hz high pass filter for subwoofer integration
 Lightweight composite enclosure with black finish
 Rugged powder-coated perforated steel mesh grille
 Dual angle pole mount for accurate audience coverage
 Multiple internal rigging points for installation applications
 Designed and engineered in the U.K.
   MILAN M12 The 1,100-Watt full-range MILAN M12 is a portable 12" two-way powered loudspeaker featuring: two independent input channels with Mic and Line Inputs, selectable via a Mic/Line switch; a two-band master EQ (Bass, Treble); intelligent Limiting; and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.   KLARK TEKNIK DSP – the Secret to Superb Sound Turbosound is proud to incorporate custom-engineered Klark Teknik DSP into their products. From the instant your signal enters the MILAN M12, the built-in DSP (Digital Signal Processor) takes over, ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the M12’s 24-bit DSP analyses the incoming signal and intelligently applies specific filters to actually improve the sound quality. It is very much like having an audio engineer monitoring the input and output signals of each M12, dialing in the perfect EQ, and constantly making subtle adjustments to the crossover, compressor/limiter, and more – which all adds up to significantly better sound.   Class-D - Massive Power, Perfect Sound Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely powerful products that are significantly lighter in weight than their traditional counterparts while using less energy and protecting the environment.   1,100-Watt Output Power With its 1,100 Watts of pristine digital output delivered through separately-powered drivers, courtesy of true bi-amping (two amplifiers per speaker system), the M12 delivers high-resolution sound that brings out the best in your music.   Custom-Engineered Drivers When you buy a MILAN M12 loudspeaker, you can rest assured the high-excursion 12" LF and 1" high-temperature dome compression drivers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results.   Wide Dispersion The M12’s HF compression driver is mated to a specially designed converging elliptical waveguide, which provides a smooth and pristine midrange to high-frequency transition – while maintaining wide dispersion and exceptional pattern control.   Integrated Mixer The onboard mixer features a Level control for each input and a two-band master EQ, complete with a switchable Low Cut filter (set at 100 Hz), which allows the M12 to provide superb clarity and projection when used as a wedge monitor – or to ensure correct integration with subwoofers.   Built for Durability and Versatility The M12’s trapezoidal enclosure is fabricated from high-density polypropylene and ribbed extensively externally and internally to eliminate resonances – and to provide an attractive, durable cabinet finish. The symmetrical 43° side angles allow the loudspeaker to be conveniently used as a floor monitor. A recessed carry handle on the top is provided for easy lifting and transport, while the dual-angle, pole-mount socket allows the loudspeaker to be mounted on straight poles or speaker stands, either vertically or raised higher and angled down to optimise audience coverage. A total of six M10 rigging points are provided on the top and bottom of the cabinet for secure vertical or horizontal suspension in permanent installations using M10 shoulder eyebolts. Mains power is connected via a non-locking IEC with an integrated fuse holder. The illuminated front badge operates in one of three modes: permanently on; permanently off; or to indicate limiting.    

Read more less

TFX122M-AN Co-axial 1,100 Watt 2 Way 12" Stage Monitor with Klark Teknik DSP Technology and ULTRANET Product Features 2-way stage monitor for portable applications 1,100 Watt power featuring Klark Teknik Class-D technology Klark Teknik Digital Signal Processing for total system control ULTRANET digital audio networking connects to mixers and other sources High excursion 12" low-frequency driver with low mass voice coil for improved transient response Titanium dome 1" compression driver with extended high-frequency reproduction Low profile design to maximise audience sightlines Low distortion waveguide provides 60? H x 40? V dispersion Fully featured user interface with LCD display for ease of navigation PC remote control software downloadable at turbosound.com 15 mm (5/8") plywood enclosure with fiberglass reinforced composite end cheeks Hard-wearing semi matt black paint finish Rugged powder-coated perforated steel mesh grille Durable handles for easy lifting and carrying Designed and engineered in the U.K.   FLASHLINE MONITORS TFX122M-AN The 2-way full range TFX122M-AN is a 1,100 Watt 12" powered loudspeaker system that is ideally suited for a wide range of portable speech and music sound reinforcement applications. Designed to work individually without a controller, the TFX122M-AN provides optimal performance for wedge monitoring and is an exceptional choice for FOH, side fill, and delay line applications.   Custom-Engineered Drivers Turbosound is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilizing only drivers designed specifically for each application – it’s what sets us apart from the competition. The TFX122M-AN loudspeaker features a high excursion 12" low-frequency driver with low mass voice coil for improved transient response, and a titanium dome 1" high-frequency compression driver mounted on a 60° horizontal by 40° vertical dispersion low distortion waveguide.   Class-D – Massive Power, Perfect Sound Equipped with a very efficient and lightweight Klark Teknik Class-D power amplifier, the TFX122M-AN provides an impressive 1,100 Watts of output power in a highly portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.   Onboard DSP A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy-to-use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels – and long-term reliability.   ULTRANET Connectivity ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers, and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.   Intuitive User Interface On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to position compensation, user EQ control, subwoofer integration, and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the TFX122M-AN via a free PC computer software download from turbosound.com – as well as convenient DSP firmware updates.   Plywood Construction Finished in a highly durable semi-matt black paint, the cabinet is constructed from 15 mm (5/8") plywood with fiber glass reinforced composite end cheeks and a rugged powder coated perforated steel mesh grille backed with reticulated foam. The TFX122M-AN includes a convenient pole mount socket for use with 35 mm poles/speaker stands to optimise coverage and a durable handle for easy transport. TFX122M-AN’s low profile design provides an improved audience line of sight for seamless integration into any application.   Touring-Grade Performance Designed to provide exceptional and unobtrusive onstage performance for traveling musicians, houses of worship, banquet facilities, night clubs – and a host of other venues, the 1,100-Watt TFX122M-AN puts touring-grade sound quality into a scalable loudspeaker system that is supremely portable and versatile.    

Read more less